While the Hub searches, make sure the lock is within 10 feet of the Hub, then:
#KWIKSET DEADBOLT REMOVAL PLUS#
Step Two: To connect a Z-Wave Kwikset lock in the SmartThings appįrom the Home screen, touch the Plus (+) icon at the top right and select Add device
The app will confirm when the process completes successfully within a few secondsĪfter the app indicates that the device was successfully removed from SmartThings, proceed to the instructions below to connect the lock. Press the “A” button on the inside of the lock once
When prompted, follow the removal process: Touch Z-Wave utilities and select Z-Wave exclusion Touch the Hub and select More Options (Three dots, at the top right ) To do this in the SmartThings mobile app:įrom the Home screen, select the Devices tab at the bottom of the screen To pair a Kwikset lock you should first reset the z-wave connection to make sure it is not paired with any other devices, and clear any old connections. If you do not have the necessary credentials, contact Lynx Support. Once you have the app downloaded, log in to begin the process. The icon for the app should look like this one. Be sure you do not download the SmartThings Classic app. On your mobile device, you will need to download the SmartThings app. You also need to remove the cover plate on the Kwikset lock that is held together by 2 screws. SmartThings V3 hub plugged into power and ethernet (or on wifi) showing a solid green LED. In order to pair a Z-Wave Kwikset 914 lock you will need the following things: Pairing a Z-Wave Kwikset 914 lock to a Samsung SmartThings V3 Hub can take about 3-5 minutes. How to: Pair Kwikset 914 Lock to SmartThings Preparation: What you’ll need
0 kommentar(er)
